This means if you are trying to get this information so you can add the Apple TV to, say, your dorm Wi-Fi network you will have to connect the Apple TV to some sort of Wi-Fi access point at least once to complete the setup and get the address information before you can give it to the tech support staff. How to Prevent Your Apple TV from Going to Sleep Once the initial setup is complete you can check it any time but not until that point. Because the information about the IP and MAC addresses is located within the system menus of the Apple TV you cannot check it until the initial setup is complete. To look for the address information let’s make a quick but important note about Historically the MAC addresses for the Wi-Fi radio and the Ethernet connection were printed directly on the bottom of the Apple TV unit and you could simply flip it over and type in the address to the web configuration tool or read the MAC address over the phone to the tech support representative.īecause this isn’t an option on the 4th generation units (and given the Apple design aesthetic likely won’t be on future generations of the hardware) let’s take a look how to check these two types of addresses on the software side of things.

Same thing if you’ve configured your router with a MAC whitelist or you want to assign static IPs to each device on your network. If you live in a dorm room or other shared living environment where you need to give the system administrator the MAC address of any device added to the network then knowing the MAC address of your Apple TV is critical. There are, however, a handful of situations where knowing the IP address or the MAC address of your Apple TV is a critical part of setting things up. How to Set Up and Configure Your Apple TV For most home users it isn’t particularly important to know the IP address of their Apple TV let alone the MAC address as the Apple TV setup is pretty much plug, quickly configure, and play.

How to check mac address on server 12